System
PBX
Fax
SMS/USSD
Reports
Options
Extras
admin Logout
PBX Configuration Monitoring Voicemails Monitoring Endpoint Configuration Tools

General Settings

In this section you can set general parametres of PBX
Dialing Options
Dial command options: t: Allow the called user to transfer the call by hitting #
T: Allow the calling user to transfer the call by hitting #
r: Generate a ringing tone for the calling party
w: Allow the called user to start recording after pressing *1
W: Allow the calling user to start recording after pressing *1
Outbound Dial command options: t: Allow the called user to transfer the call by hitting #
T: Allow the calling user to transfer the call by hitting #
w: Allow the called user to start recording after pressing *1
W: Allow the calling user to start recording after pressing *1
r: You SHOULD NOT use this option on outbound trunks
Call Recording
Call recording format: Format in which to save recorded calls WAV
Dictate recordings keep time: Number of days to keep dictate recordings (0 to keep forever)
Voicemail
Ringtime Default: Default number of seconds to ring phones before sending callers to voicemail. This can be set per extension/user and will have no effect on phones with no voicemail.
Ringtime from Calendar: Number of seconds to ring from Calendar.
Direct Dial Voicemail Prefix: Prefix used to dial directly to someone's voicemail. Caution should be taken in choosing this prefix to avoid conflicts with featurecodes.
Direct Dial to Voicemail message type: Default message type to use when dialing direct to an extensions voicemail
Optional Voicemail Recording Gain: Use the specified amount of gain when recording the voicemail message.

The units are whole-number decibels (dB), -15 to 15.
Do Not Play "please leave a message after the tone" to caller:Check this to remove the default message "Please leave your message after the tone. When done, hang-up, or press the pound key." That is played after the voicemail greeting (the s option). This applies globally to all vm boxes.
Voicemail VmX Locator
Default Context & Pri: Default to use if only a number/extension are provided.  context  pri
Timeout/#-press default: This is the default location that a caller will be sent if they don't press any key (timeout) or press # which is interpreted as a timeout. Set this to 'dovm' to go to voicemail (default).  context   exten  pri
Loop Exceed default: This is the default location that a caller will be sent if they press an invalid options too man times, as defined by the Maximum Loops count. Set this to 'dovm' to go to voicemail (default).  context   exten  pri
Timeout VM Msg: If this destination is voicemail, select whether or not to play the standard voicemail instructions or just beep.
Max Loop VM Msg: If this destination is voicemail, select whether or not to play the standard voicemail instructions or just beep.
Direct VM Option If a user defined option is to go to voicemail (using the 'dovm' extension) this is the default option if not specified by the user's settings.
Msg Timeout: Time to wait after message has played to timeout and/or repeat the message if no entry pressed. seconds
Msg Play: Number of times to play the recorded message if the caller does not press any options and it times out. times
Error Re-tries: Number of times to play invalid options and repeat the message upon receiving an undefined option. times
Operator Extension: When users hit '0' while listening voicemail announcement, they are put through to this number. Note that it does NOT need to be an extension, it can be a Ring Group, or even an external number.
Fax Machine
Extension of fax machine for receiving faxes:Select fax extension to which faxes will be redirected.
International Settings
TimezoneDefault timezone for phones: GMT+4:00
Country IndicationsSelect which country you are in:
24-hour formatSelect Yes if you use 24-hour format or No if you are using 12-hour am/pm format:
Voice message language:Choose the language of voice messages. It's the global PBX parameter.
Security Settings
Allow Anonymous Inbound SIP Calls? ** WARNING **

Setting this to 'yes' will potentially allow ANYBODY to call into your PBX using the SIP protocol

It should only be used if you fully understand the impact of allowing anonymous calls into your server
:
Chanspy
Chanspy password Please set chanspy password
:

© 2011. NEOPbx IP PBX NEO